Requirements for LMC Remittance

Before you can setup LMC Remittance, the following requirements must be met:

• Level 24 software or higher is installed on your Eagle system

• Eagle Accounts Payable system is set up

• Async modem installed

To verify that these requirements have been met, complete the procedure steps in the following sections.

Check Software Level

Complete the following to verify that Level 24 (or higher) software is installed.

1. From Network Access at the Function prompt, type PCO and press <Enter>. The Show PCO Level screen displays.

2. Check the Programs field, it should be 24.nnnn (or higher). If the Programs field is less than 24, contact the Eagle Advice Line at 1(800)-322-3077 to order the latest software level.

3. Press <End> to exit the screen.

Eagle A/P System Is Set Up

The Eagle Accounts Payable system must be set up and working in order to use the LMC Remittance application. You must be able to generate A/P checks.

Async Modem Installed

To transmit LMC remittance information, an async modem must be installed and working on your Eagle system. If you are not sure if a modem is installed or working, contact the Eagle Advice Line or your Field Engineer at 1(800)322-3077.