Transactional Security: Setup
The following are the requirements and prerequisites for using Transactional
Security.
- Eagle Licensing must activate option 1345 "Point
to Point Encryption on system" in Options Configuration
- Your Eagle must be running Release 24.1 or higher
- You must be using the Epicor Payment Gateway
- You must be using Ingenico iSC250 pin pads
- You must download RBA 12.01 or higher from Device
Configuration to the iSC250 pin pad. WARNING: This download can take
45 minutes per pin pad if you are not yet on RBA 3.33.
- At each terminal with an ISC250 attached,
do the following:
- Open Eagle Browser
- Click "Utilities" in the left
pane
- Click "Device Configuration"
- Double Click on the line where "Signature
Capture" is listed
- In the grid, click on the line where "ISC250
RBA 12" is listed
- Wait until it is finished
- Go back to the Credit/Debit Pad screen
and click "Options"
- Choose “P2PE” from the Device Configuration
options menu for the iSC250 pin pad
- Repeat these steps for all terminals with
an ISC250 attached
- You must be processing payment cards with one
of the following:
- FDMS
- Global
- Chase Paymentech
- RBS Worldpay (Available in March 2016)
- EPX
- If
you currently have stored credit card numbers for you AR customers
you can run a utility to convert them to tokens. Click here
to view the procedure.
Setup Instruction and Tokenization
Utility Instructions are in Online Help and Training on Demand